The 5G remote transmission pressure measuring water meter ensures that the water meter can be used in highly polluted and corrosive environments, with a fully connected structural pressure measuring function. The intelligent electromagnetic water meter has extremely high sensitivity.

Manufacturer of 5G remote transmission pressure measuring electromagnetic water meter

The 5G remote transmission pressure measuring electromagnetic water meter LXE series is an intelligent water meter designed specifically for water companies’ large user trade measurement and residential water use, with a high measurement range (R160. R400), Especially suitable for situations with significant changes in traffic. Extremely high sensitivity ensures that there will be no underestimation or omission. It is the best choice for large user metering, pipeline leak detection, and consumption reduction gain.

1. Measurement structure: Adopting single beam or multi beam structure.
2. Automatic reporting: Proactively upload data at regular intervals.
3. Supporting operators: China Mobile, China Telecom, China Unicom.
4. Ladder billing, the more you use, the more expensive your water bill will be.
5. Remote meter reading to solve the problem of household meter reading.
6. Prepaid: Supports various methods such as mobile apps to pre charge water bills.
7. Remote valve control: With remote valve control function, preset switch valve commands can be achieved through finger touch

characteristic

1. The electromagnetic water meter adopts electromagnetic flow sensing technology and Faraday’s law of electromagnetic induction.
2. The electromagnetic water meter converter has low power consumption, excitation, and adopts sealed technology.
3. The electromagnetic water meter has good linearity and a large range ratio.
4. The electromagnetic water meter has high accuracy (level 1).
5. Electromagnetic water meters have no flow blocking components and low pressure loss.
6. The electromagnetic water meter adopts bidirectional measurement.
7. Adopting 304 stainless steel sensors with waterproof, anti electromagnetic interference, and anti-corrosion functions.
8. It has an IP68 protection level and can work normally after prolonged immersion in water.
9. RS485 acquisition function of low-power remote measurement and control terminal: The terminal has an RS485 communication interface, which supports standard MODBUS-RTU and CJ-188 protocol for instrument data acquisition, and is compatible with mainstream international and domestic flow instrument protocol data acquisition.
10. Micro power remote measurement and control terminal pulse acquisition function: The terminal supports single, double, and triple pulse signal acquisition for pulse mechanical meters, compatible with Hall signal and reed switch signal acquisition, and has forward and reverse measurement functions.
11. Analog signal acquisition: The terminal has two analog signal acquisition interfaces, one for voltage signal acquisition, compatible with 0-5V, 0.5-4.5V, 1-5V, and one for current signal acquisition, compatible with 4-20mA and 0-20mA.
12. Data storage function: The freezing time interval of the terminal can be set, and 1000 data can be frozen and stored. The system can remotely read the historical data of the RTU.
13. Data self reporting function: The terminal can set the automatic data reporting interval and report the unreported data within 3 days on a scheduled basis.
14. Bluetooth debugging function: The terminal is equipped with an RTU communication module, which can be configured and debugged using a mobile app.
15. Remote upgrade function: The terminal has a remote upgrade function, and through wireless network, the RTU program can be upgraded over the air for easy maintenance.