Metal tube float flowmeter is an instrument used to measure the flow rate of various media such as pipelines and fluids. It is produced and researched using the principle of variable area measurement and is suitable for measuring liquids and gases. It has an all metal structure, including indicator type, electric remote transmission type, corrosion-resistant type, high-voltage type, jacket type, explosion-proof type, with standard analog signal output and on-site indication of 0-10mA and 4-20mA. Accumulation, digital communication, on-site modification of measurement parameters, different power supply functions, with magnetic filters and special specifications, widely used in petroleum, chemical, power generation, pharmaceuticals, food, water treatment, etc. During the flow measurement process under complex, harsh environmental conditions, and various media conditions.

Manufacturer of intelligent metal tube float flowmeter

The float of the metal tube float flowmeter moves upwards with the change of flow rate in the measuring tube, and at a certain position, the buoyancy and gravity of the float reach equilibrium. At this time, the circulation gap area between the float and the orifice plate (or cone tube) remains constant. The annular gap area is directly proportional to the rising height of the float, that is, the position where the float rises in the measuring tube represents the size of the flow rate. The change in the position of the float is transmitted by the internal magnet to the external indicator, so that the indicator correctly indicates the current flow rate value. This means that the indicator housing does not come into direct contact with the measuring tube, so even if limit switches or transmitters are installed, the instrument can be used under high temperature and high pressure working conditions.

Product features of metal tube float flowmeter

Metal tube float flowmeter is a commonly used variable area flow measurement instrument in industrial automation process control. It has the characteristics of small size, large detection range, and easy use. It can be used to measure the flow rate of liquids, gases, and vapors, especially suitable for measuring the flow rate of low velocity and low flow media.
Main features:

1. Sturdy all metal structure design float flowmeter
2. Measurement tube indicator designed with independent concept
3. Stainless steel, Hastelloy, titanium, PTFE material measurement systems can be selected
4. Low pressure loss design
5. Suitable for flow measurement of small caliber and low velocity media.
6. Reliable work, minimal maintenance, and long lifespan.
7. The requirements for straight pipe sections are not high.
8. A wider traffic ratio of 10:1.
9. Dual row large LCD display, optional on-site instantaneous/cumulative flow display, with backlight.
10. Single axis sensitive display.
11. Non contact magnetic coupling transmission.
12. All metal structure, suitable for high temperature, high pressure, and highly corrosive media.
13. Can be used in flammable and explosive hazardous environments.
14. Optional options include two-wire system, battery, and AC power supply.
15. Equipped with data recovery, data backup, and power down protection functions.

1. All metal structure, miniaturization, unified installation size of 250mm, stable and reliable operation;
2. Suitable for flow measurement and control of various gaseous and liquid media, available in damping, corrosion-resistant, and jacket types;
3. The instrument protection level is IP66, with optional “Ex d IIC T6 Gb/Ex tD A21 IP66 T80C” explosion-proof and “ExiaIC T1-T6 Ga, Exia III CT80 ℃ – T440 ℃ Da” explosion-proof types, suitable for various harsh environments;
4. Intelligent conversion module, multiple output modes, on-site indication, 4-20mA DC electrical signal output, LCD display total accumulation. There are various types of output signals: switch signal output, HART protocol communication, FF communication, PROFIBUS PA communication signals.
5. The design of the new magnetic steel coupling structure ensures the stability of signal transmission.
6. Gas damping device ensures stable measurement of low-pressure or fluctuating media.
7. Low pressure loss design, multi-stage correction of medium density, temperature, and pressure.
8. Obtain international ATEXIECEx certification and classification society certification.
9. The material of the converter can be upgraded to 316L according to user needs, which is more suitable for corrosive environments.