The intelligent micro ultrasonic flowmeter is an industrial grade time difference ultrasonic flowmeter. It adopts an industrial grade PFGA chip with a 700000 gate array, greatly improving the signal sampling frequency and bubble tolerance. The independently developed technology enables it to handle more complex logic and operations, achieving more accurate and faster measurements. Enable the flowmeter to withstand discontinuous bubbles or impurities for 5 seconds. At the same time, it has the characteristics of simple installation and convenient use of ultrasonic flow meters, and can be installed without breaking pipes or stopping water and work.
Manufacturer of intelligent micro ultrasonic flowmeter
● Reading accuracy: 2% ● Flow range: 60L~400L/min
● Supports measuring materials such as metal/PVC, PP or PVDF hard plastic pipes ● Default low flow cut-off value: 0.1m/s
● Medium: Liquid without impurities or particles ● Corresponding time: 0.5~60 seconds
● Working temperature: 0-70 ℃ (no freezing on the surface) ● Display: Backlit LCD
● Output signal: 4-20mA ● Shell protection level: IP65
Application industries: municipal wastewater measurement, crude oil flow measurement, cementing mud flow measurement, oilfield oily wastewater flow measurement, oil well injection water flow measurement, river, reservoir raw water measurement, tap water flow measurement; Petrochemical product process flow detection, industrial circulating water flow measurement; Measurement of water consumption in the production process, measurement of mineral slurry flow rate, measurement of pulp flow rate, measurement of chemical flow rate, measurement of cooling circulating water flow rate, measurement of generator set line cooling water flow rate (ultra small pipe diameter), measurement of juice flow rate, measurement of milk flow rate.
Product characteristics
Simple installation and easy operation. There is no need to break the pipe or stop the construction for a long time, and the installation is easily completed in a few minutes.
The new external clamp design eliminates contact with the measuring medium. It can avoid the pressure loss and media pollution caused by traditional flowmeters.
A variety of modes can be set up, flexible and diverse. A universal measuring range of all calibers, and suitable for a variety of metal pipes and resin pipes.
Super large screen display. The display content is diverse and human-machine friendly.
It can be selected as ultrasonic cold (heat) meter to realize the monitoring and measurement of energy consumption.
| Pipe diameter | Upper flow value (L/min) |
| 15 | 60L/min |
| 20 | 100L/min |
| 25 | 200L/min |
| 32 | 300L/min |
| 40 | 400L/min |
Installation interpretation
It is best to install the flowmeter indoors. If it needs to be installed outdoors, measures should be taken to avoid direct sunlight and rain.
Flow meters should be avoided from installation in places with high temperatures, equipment thermal radiation, or corrosive gases. If installation is necessary, insulation and ventilation measures must be taken.
Ultrasonic flow meters should not be installed near motors, transformers, or other power sources that are prone to electromagnetic interference.
Do not install the ultrasonic flowmeter near the frequency converter or obtain power from the frequency converter distribution cabinet to avoid interference.
For the convenience of installation, maintenance, and upkeep, there needs to be ample installation space around the flowmeter.